Crosby 5/8" G-2130 Bolt Type Anchor Shackle (WLL 3.25 ton)

Crosby G-2130 Bolt Type Anchor Shackles meet or exceed all requirements of ASME B30.26 including identification, ductility , design factor, proof load and temperature requirements. Importantly, these shackles meet other critical performance requirements including impact properties and material traceability, not addressed by ASME B30.26.

• Size (Shackle Body Thickness): 5/8"
• Working Load Limit (WLL): 3.25 tons (6500 lbs)
• Pin Size: 0.77"
• Pin Type: Bolt, Nut, & Cotter
• Throat Opening (Width Between Ears): 1.06"
• Throat Depth: 2.38"
• Material: Carbon Steel Body & Alloy Steel Pin
• Finish: Hot Dip Galvanized
• Forged Carbon Steel – Quenched and Tempered, with alloy bolts
• Working Load Limit permanently shown on every shackle
• Fatigue rated
• Approved for use at -40° C (-40° F) to 204° C (400° F)
• Meets the performance requirements of Federal Specification RR-C 271G, Type IVA, Grade A, Class 3, except for those provisions required of the contractor
• Made in the USA